|
|
CFD software calibration
Gego, Tomáš ; Zima, Martin (referee) ; Popela, Robert (advisor)
The objective of this thesis was to calibrate a CFD software for use on a Formula Student race car. The calibration is performed by comparing the experimental data from the measurement of a single element wing in a wind tunnel with the same case replicated in a CFD software, for which the optimization of settings of the meshing and solver is performed. The result is an evaluation of deviations of CFD by assessing aerodynamic characteristics such as downforce, drag, pressure distribution, separation and wake in freestream and ground effect. The results are processed into a graphical and text form for future use in the design of aerodynamic components.
|
|
|
Analog system SW simulator
Košta, Ondřej ; Kaczmarczyk, Václav (referee) ; Bradáč, Zdeněk (advisor)
This Master’s Thesis focuses on development and realization of analog system software simulator for simulation of various kinds and orders systems and for function verification of microcontrollers’ control systems. The development and realization of PSD controller is part of this thesis as well. The simulator is written in C++/CLI programming language which combines fast execution of native code and provides an advantage of managed code which has its execution managed by the .NET Framework. The data acquisition is performed via National Instrument’s USB multifunctional DAQ. The PSD regulator is realized by using modern ARM processor architecture.
|
|
|
Design and analysis of membrane roof of a stadium.
Lang, Rostislav ; Kytýr,, Jií (referee) ; Němec, Ivan (advisor)
This diploma thesis deals with problem of design and calculation of membrane structure of stadium roof. This is a complex engineering problem, which includes many partial problems: finding of initial form of membrane, statically and architecturally suitable arrangement of catenaries, economical solution of boundary conditions (foundations). All components affect each other and cannot be dealt without mutual coordination. It always greatly depends on the experience and intuition of engineer who design such structure. Task which cannot be resolved according to the theory of the first order. Equilibrium forces on the deformed structure, which in many projected structures gives satisfactory results, did not correspond to reality. It is therefore necessary to consider equilibrium of forces on the deformed structure according to the theory of large deformations. Diploma thesis was entered with regard to the intention of the companies Ing. Software Dlubal s.r.o. and FEM consulting s.r.o., working together to develop software RFEM. These companies plan to complement this program system with a module MEMBRANE for searching of initial shapes of membrane structures. This work is a contribution to the creation of this module.
|
|
|
Volumetric Efects Accelerated on GPU
Kubovčík, Tomáš ; Tóth, Michal (referee) ; Starka, Tomáš (advisor)
This thesis deals with simulation and rendering of fluid based volumetric effects, especially effect of fire and smoke. Computations are accelerated on graphics card using modern graphics API with motivation to achieve realistic visual results as well as physically correct calculations. Implemented volumetric effects are distributed as dynamic library which allows addition of these effects to existing applications.
|
|
| |
|
|
The effect of sampling period error on frequency analysis
Pietrowicz, Daniel ; Marada, Tomáš (referee) ; Zuth, Daniel (advisor)
This thesis will be focused on signal measurement in connection with digitization and analysis inaccuracy of sampling peroid effect. Brief narration of frequency analysis and description of Matlab and his capabilities with this issue. Then creation procedure for simulation model of analog signal and his fault digitization via sampling period. Systematic comparation of this effect on inaccuracy of sampling period on frequency analysis.
|
|
|
Mesh Generator for the Finite Element Method
Ščišľak, Tomáš ; Čapek, Miloslav (referee) ; Kadlec, Petr (advisor)
The paper describes basic principles of the finite element method. Further, basic properties of triangulation are discussed. The thesis is primarily focused on the Delaunay and Greedy triangulation. Greedy triangulation is simple to implement, but may not produce the optimal shape of triangles. Delaunay method is used due to its robustness in a wide range of fields especially in computer graphics. This method is relatively easy to implement and provides triangles with high quality.
|
|
|
Preprocessing Methods in Knowledge Discovery
Pokorný, Lubomír ; Lukáš, Roman (referee) ; Bartík, Vladimír (advisor)
This thesis discusses preprocessing methods in knowledge discovery. There are four methods of discretization, filling in the missing values and normalization is investigated. There is closer view on building the application which discretizate numeric atribute in database. All methods were successfully tested and the results were added.
|
|
|
Web Page Classification
Kolář, Roman ; Burget, Radek (referee) ; Bartík, Vladimír (advisor)
This paper presents problem of automatic webpages classification using association rules based classifier. Classification problem is presented, as a one of datamining technique, in context of mining knowledges from text data. There are many text document classification methods presented with highlighting benefits of classification methods using association rules. The main goal of work is adjusting selected classification method for relation data and design draft of webpages classifier, which classifies pages with the aid of visual properties - independent section layout on the web page, not (only) by textual data. There is also ARC-BC classification method presented as a selected method and as one of intriguing classificators, that derives accuracy and understandableness benefits of all other methods.
|
|
|
Commented translation of a text on science and technology
Heger, Matěj ; Krhutová, Milena (referee) ; Zmrzlá, Petra (advisor)
Bakalářská práce se zaměřuje především na překlad odborného textu s důrazem na použitou terminologii. Vybraný text pojednává o problematice mikrovln a jejich zpracování v počítačových systémech. Práce sestává z dvou stěžejních částí, přičemž první se soustřeďuje na výše zmíněný překlad odborného textu a druhá se věnuje jeho podrobné jazykové analýze. Analytický rámec zahrnuje všechny důležité jazykovědné disciplíny a předkládá výňatky přímo z textu. Tyto výňatky jsou následně porovnávány a postupně je ověřována správnost použitých jazykových prostředků pomocí citací z kvalitních zdrojů a slovníků.
|
guest ::
